Intended Use; Preparation; Installation - Goobay 71366 Mode D'emploi

Protection level
Environment
Dimensions
Mounting hole diameter
(Hollow profiles)
Mounting hole distance
(Surface mount)
Weight
3

Intended Use

IP20
We do not permit using the device in other ways like described in
chapter "Description and Function" and „Safety Instructions". This
product is protected against medium sized foreign objects, but not against
water ingress. Not attending to these regulations and safety instructions
might cause fatal accidents, injuries, and damages to persons and property.
4

Preparation

• Compare the specifications of all used devices to ensure compatibility.
• Check the scope of delivery for completeness and integrity.
5

Installation

• Let open cable ends ONLY assemble by experienced
electrician.
• Cut off power supply before any work on the product,
switch off safety fuse and secure against reconnection.
• Assure and check the absence of voltage before any
work on the product.
• Connect the daylight sensor in one of the ways described below.
Risk of electric shock
IP20
-20 ~ +40 °C, <93 % RH
Ø22 x 63.5 mm
17 mm
28 mm
28 g
Tab. 2: Specifications
Fig. 14: Installation
16