Intended Use; Preparation; Installation - Goobay 45801 Mode D'emploi

User manual
Installation place
Solar panel
Voltage (V)
Type
Work (Wp)
Tab. 2: Specifications
3

Intended Use

Any use other than those described in the chapter „Description and Function"
and „Safety Instructions" is not permitted.
IP65
This product is dust-proof against touch and protected against water
jets.
4

Preparation

• Compare the specifications of all used devices to ensure compatibility.
• Check the scope of delivery for completeness and integrity.
5

Installation

• Place and use tools safely.
• Pay attention to current-carrying or other
lines, lying behind plaster and do not
damage them!
The surface must be stable. The supplied mounting material is only for
concrete and stone walls. For mounting on other surfaces, other dowels must
be used.
Plants, street lighting, reflecting surfaces and arbitrarily moving objects may
not be located in the detection area.
Recommended mounting location: as sunny as possible, 2-4 m mounting
height.
1. Use the included template and, if necessary, a water scale for mar-
king mounting holes.
2. Drill the necessary number of mounting holes with a Ø 6 mm drill.
3. Insert the necessary number of dowels and mounting screws into
the holes.
Leave the mounting screws approximately 4 mm standing out of the wall.
4. Hang the product from the top onto the mounting screws.
5. Gently tighten the mounting screws.
15
If possible sunbathing or light-rich places or house sites
5
Poly-Crystalline Silicone
0.7 1.0
Risk of electric shock / Risk of falling
Mono-Crystalline Silicone
2.3 4.4