Niko 360-31001 Mode D'emploi page 5

3. Remove the central plate from the Niko dimmer switch (360-31001) and mount the programming adapter (360-39001) to activate the configuration mode. Ensure that the "OBEN / TOP" indication on the programming
adapter faces the "OBEN" and "TOP" indications on the upper left/ right corners of the Niko dimmer switch. The red LED on the programming adapter's will now light up.
a
* Batteries not included
360-31001
b
72-505
72-515
72-506
72-516
4. Upload the communication objects and corresponding parameters to the KNX
The red LED of the programming adapter flashes during the upload.
Detach the KNX programming adapter from the dimmer switch.
®
The dimmer switch will revert to the normal mode.
PM360-31001_EN
OBEN / TOP
® dimmer switch.
*
c
360-31001
5
EN