Mantion SLID UP M300 Notice De Pose page 23

Auto mode operation (SWITCH 1 OFF)
Press on the control button.
Press the button during the opening.
Press on control button when the door is open.
Press the button during the closing.
Manual mode operation (SWITCH 1 ON)
Warning: Push buttons must imperatively be connected to E1 input. E2 input has not to be used.
Press the control button.
Press the button during the opening.
Press the control button when the door is
open.
Press the button during the closing.
In case of obstacle during the closing, the door(s) is/are opening.
In case of obstacle during the opening, the door(s) are stand still.
Auxiliary output
The auxiliary output is manipulated when the door is closed. The auxiliary output can for instance,
order a locking mechanism.
After an action from the door, the auxiliary output is not controlled anymore.
The door is opening.
Automatic closing of the door after few
seconds (about 4 s).
The door is closing.
The door stays open.
The door is opening.
The door is opening and stays open.
The door is closing.
The door is closing.
The door is opening.
GND
24 VDC
23