Publicité
Les langues disponibles
Les langues disponibles
Fitting instruction clamps
Triumph Bonneville/Scrambler
Important: If you are not a trained motorcycle mechanic, stop now. Ask a
motorcycle shop to do the work for you.
The position of the handlebar will change by the offset. Please make sure, that all Bowden-cables
and lines offer free wheel and no tension.
1. Make sure, that the handlebar has got sufficient clearance to the fuel tank.
2. All lines/cables must have the necessary length.
3. Safe all lines/cables against bending, twisting or squashing.
4. The bending radius of hoses may not be below 40mm. Hoses may not twist when suspension is
working or fork is moved across the steering angle.
5. If necessary use longer/shorter brake- and clutch-lines, according to the FMVSS 106 standard.
Check all bolted connections after the fitment!
P/N: 127T044SW
Rev. 00 01/03/2013
Publicité
