Télécharger Imprimer la page

Fitting Instructions - Össur Cold Rush Notice D'utilisation

Masquer les pouces Voir aussi pour Cold Rush:

Publicité

ENGLISH
USES
Cold Rush pads are for single patient use only
Cold Rush pads are designed to reduce localized pain and swelling following
surgical procedures or trauma.
WARNING
READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE OPERATING THE
COLD RUSH COLD THERAPY SYSTEM.
The Cold Rush pad may become cold enough to cause serious injury to the skin.
Correct temperature range for each patient's skin should be determined on an
individual basis by a licensed healthcare practitioner. Patients vary in sensitivity to
cold. Periodically monitor the temperature and appearance of the skin being
treated once steady flow of water through the pad is achieved.
The temperature at the surface of the skin may vary depending upon the amount
of dressing used and other factors beyond the control of the manufacturer.
Temperature and color of the skin at the treatment site must be monitored by a
licensed healcare practitioner.
The Cold Rush Pad should never be applied directly to the patient's skin. Do not
use the Cold Rush Cold Therapy System without first applying an insulation barrier
between the Cold Rush Pad and the patient's skin.
This Cold Rush pad is not sterile; do not apply over open or broken skin. To obtain
an Ossur sterile pad, contact your healthcare professional.
Care should be taken during use for children, diabetics, incapacitated patients and
those with decreased skin sensitivity or poor blood circulation.
If prescribed by a licensed healthcare practitioner for home use, the heath care
practitioner must provide each patient with guidance for use of the device. As well,
the healthcare practitioner must monitor the patient's use of the device to assure
appropriate use of the device and proper application of cold therapy.
Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.

FITTING INSTRUCTIONS

1.
Remove Cold Rush Pad from packaging.
2.
Inspect pad to make certain that it is free of defects.
* For each pad shape - Figures 1-4 represent site specific pad configurations
and anatomies.
3.
Apply insulation barrier over the patient's skin in the area to be treated. (Figure 1)
4.
Apply Cold Rush Pad over insulation barrier, with the fabric facing up. Pad should
never be applied directly to the patient's skin. (Figure 2)
5.
Apply elastic straps over the Cold Rush Pad. Be sure not to wrap the pad too
tightly as it may restrict blood flow or water circulation.
6.
Connect Cold Rush Pad to hose extending from the unit. To ensure proper
connection, push couplings together until they snap into place. (Figure 4)
7.
Follow operating instructions provided with your Cold Rush Therapy System.
8.
When you are finished with your cold therapy treatment, turn the Cold Rush Cold
Therapy System unit pump off and disconnect the pad from the hose couplings.
9.
When you have finished all of your cold therapy treatments, discard the Cold Rush
Pad.  You may want to save the pad to use in cleaning your Cold Rush Cold Therapy
System.  (The Cold Rush Cold Therapy System Instructions For Use reviews this
cleaning process in detail). 
LIMITED WARRANTY
Ossur warrants, to the original purchaser, that this product is free from defects in
materials and workmanship for 30 days from initial purchase. This warranty does not
apply if this product (1) was not purchased from Ossur or its authorized dealer, (2) has
been altered in any way, or (3) has not been used in accordance with Ossur's
Instructions For Use (IFU). This Limited Warranty does not cover damage due to
accidents, neglect, misuse, or operation beyond capacity, parts damaged by improper
installation, substitution of parts not approved by Ossur, or any other alteration or repair
by others that, in Ossur's judgment, materially or adversely affects the product or part.
(Figure 3)
8

Publicité

loading