Battery Charging - Scott SOLACE GRAVEL eRIDE 30 Manuel

3 Operation
3.1

Battery charging

WARNING
Fire or electric shock hazard due to damage to Battery, Range Extender,
charger, cable and plug
► Never charge the Battery if you notice any damage to the Battery, Range
Extender, charger, cables or connectors.
► Only perform the charging process in a place where there are no flam-
mable materials in surrounding.
► Never leave the charging process unattended.
NOTE
You can charge the Battery either directly with the charger or via the
optional Range Extender. For more information, refer to the corresponding
user manuals for the charger and the Range Extender.
► Connect the charger to the power supply.
► Unfold the cover (pos. 1 in fig. 1) on
the charging port (pos. 2 in fig. 1) in
the bike frame.
► Check that the contacts in the
charging port are free of dirt and
clean them if necessary.
► Align the charging plug (pos. 3
in Fig. 1) of the charger or Range
Extender so that the plug codes of
the charging plug and charging port
match (see Fig. 1).
► Insert the charging plug (pos. 3
in Fig. 1) of the charger or Range
Extender into the charging port.
► Pull the charging plug out of the charging port when charging is
complete.
► Close the cover on the charging port when charging is complete and
disconnect the charger from the power supply.
3
Fig. 1: Battery charging
1
2
EN - 5