Operating Instructions - Westinghouse WSFNCP001BK Manuel D'instructions

OPERATING INSTRUCTIONS

18" High Velocity Fan
1. Place the metal fan on a flat, dry and stable surface.
2. Make sure the rotary switch knob (7) is at the "0" (OFF)
position.
3. Connect the power cord to a 120 VAC / 60 Hz wall outlet.
4. Adjust the metal fan vertically to the desired angle.
5. Adjust the metal fan speed by turning the rotary switch knob
(7) to the "1" (Low), "2" (Medium) or "3" (High) position.
6. Turn off the metal fan by switching the rotary switch knob (7)
to the "0" (OFF) position.
7. Unplug the power cord from the wall outlet when the fan is not
in use.
USB Desk Fan
1. Unwind the USB cable (19) attached to the personal fan.
2. Connect the personal fan to the power supply. You can do this
in two ways:
- Insert one end of the supplied USB cable (19) into a USB port
on your computer, or
- Insert one end of the supplied USB cable (19) into any power
adapter with 5V 500mA or 1A, and then plug the power
adapter into a 120 VAC / 60 Hz wall outlet.
3. To turn on the personal fan, switch the ON/OFF button (18) to I.
To turn off the personal fan, switch the ON/OFF button (18) to
O and disconnect the power adapter from the power supply.
Note: This is a complimentary fan and does not come with power
adapter.
HOW TO USE
EN
9