EFI Fiery proServer Guide D'installation page 2

20cm+ (8 in.)
20cm+ (8 in.)
1 Back panel
2 Fiery proServer
3 Side panel
Network
•
Make sure that the network is available. For more information on the required network ports, see
on page 2.
•
Verify with the IT administrator that the network is functioning.
•
Ensure that the IT administrator is available during the installation.
Equipment downtime and impact on the network can be minimized if the IT administrator installs a network
connector for the Fiery proServer and confirms network functionality with the connector in place before the Fiery
proServer installation.
When the site is ready, installation of the Fiery proServer takes about three hours.
Network ports
When checking the availability of the network or installing anti-virus software, make sure that the following network
ports are not blocked as they are needed for specific features of Command WorkStation.
Port
4108
8010, 8013
8020, 8022, 8030, 8032
8051, 8052, 8053, 8054, 8061, 8062, 8063,
8064
26502, 27000 to 27009, 60000
50005 to 50026
Used for
Epson Spectroproofer
Bi-directional communication service
Integration and connectivity between Fiery XF server and EFI printers
Communication between Fiery XF server and APPE processes (up to four
instances)
License management/EFI Cut Server
General communication between the Fiery XF server and Command
WorkStation
Installation Guide
Fiery proServer, version 7.2
Network ports
2