Magontec CORREX MP 2.3-900 Notice D'utilisation page 30

Operating Instructions CORREX
6.3 CORREX
®
The CORREX
alternatively used for:
• socket mounting,
• insulated-hole mounting.
Check by comparison with the table below that the parts and components
supplied are complete and that the small bag is intact.
Number Item
1
1
1
1
1
2a
2b
2c
3a
3b
4
5
6,8
7
9
1
The item numbers of the mounting kit correspond to the numbering in the
annex ‚Mounting kits for retrofitting - arrangement of parts'
Note: The mounting kit for socket mounting requires prefitting of the screw
fitting set in acc. with chapter 7.1.3.1. The mounting kit for insulated hole
mounting is used as described in chapter 7.2.2.
30
® MP 2.3-900
MP 2.3-900 scope of supply with mounting kit for retrofitting
MP 2.3-900 system with mounting kit for retrofitting can be
®
Description
Titanium anode with threaded bolt and seal washer
Plug-in potentiostat with pilot lamps
Connecting cables with connectors
Mounting kit in small bag containing:
Seal
Screw fitting G
Screw fitting G 1"
Screw fitting G 1
Insulation sleeve, small
Insulation sleeve, large
Washer M8
Tooth-lock washer M8
Nut M8, galvanized
Tooth-lock washer with tab connector
Flat nut M8, galvanized
Operating instructions
3 / "
4
/ "
1
4