cecotec mambo 9090 Manuel D'instructions page 14

of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are dry
before handling the plug.
Do not leave the appliance unattended.
Always turn the appliance off and disconnect it from the
power supply before changing accessories, disassembling
or assembling the product or approaching cutting or moving
elements.
Check the power cord regularly for visible damage. If the cord is
damaged, it must be replaced by the official Technical Support
Service of Cecotec in order to avoid any type of danger.
Do not remove the product's lid when boiling water or during
operation.
Do not use any accessory that has not been recommended by
Cecotec, as they might cause injuries or damage.
Check the main body, jar, steamer and other components
regularly for damage. If any damage is detected, do not use the
appliance.
Make sure the blades are properly assembled, with the sealing
ring in place, before operating the device.
When cooking with temperature setting, do not lock the
measuring cup.
Place it in the unlocked position or remove it for a better steam
release.
After cooking with temperature settings, wait at least 3 minutes
until the appliance has completely cooled down before opening
it.
If the product stops working unexpectedly, turn it off and
switch it off immediately from the power supply.
Do not try to repair the device by yourself.
The hole on the product's lid can only be covered with the
measuring cup. Do not use clothing or other objects.
14 14