THOMSON ROC Z907 Mode D'emploi page 4

G Operating instruction
Thank you for choosing a Thomson product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2. Controls and displays
1. Function LED (red)
2. 12 V car plug
3. USB connection, 2.1 A
4. Programmable buttons 1–4
5. Operating LED (lit blue in 12 V operation)
3. Package Contents
• ROC Z907 universal garage door remote control
• These operating instructions
4. Safety Notes
• Use the product for its intended purpose only.
• Do not operate the product outside the power limits
given in the specifications.
• Protect the product from dirt, moisture and overheat-
ing, and only use it in a dry environment.
• Do not use the product in moist environments and
avoid splashes.
• Do not drop the product and do not expose it to any
major shocks.
• Keep this product, as all electrical products, out of the
reach of children!
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
2
• When using this product, observe the applicable local
traffic laws and regulations.
• Take care that components such as airbags, safety
areas, controls, instruments, etc. and visibility are not
blocked or restricted.
Note
For some vehicle types, the ignition has to be switched
on to supply power to the 12 V car socket. For more
information, please refer to your vehicle's manual.
Before initial startup / programming
Risk of accidents: To avoid possible damage and per-
sonal injury, make sure there are no people or objects
in the immediate environment during programming
and installation of the product. The garage door may
open or close during installation. We recommend car-
rying out the programming procedure with the vehicle
parked outside the garage. Only use the ROCZ907
with a direct view of the door opening system or ga-
rage door. Please also observe the safety instructions
for your door operator (operating instructions).
Note
• To fully program the door operator, the operating
instructions for the door operator may also be
required (for example, registering handheld
transmitters with the door operator).
• To use the ROCZ907, it is essential to still have at
least one functioning original handheld transmitter.
• In spite of the broad universal nature of this
handheld transmitter function, it is possible that
some garage door systems cannot be operated
with this product. Possible causes include other
frequency usage or additionally encrypted radio
technologies (including bidirectional encryption, for
example, 128-bit).