Coupling Requirements - PROUSER DIAMANT TG Notice D'assemblage

most cars this is 75kg). The total weight of the bike carrier with the bicycles
cannot exceed the maximum permissible ball load of the tow bar.
Diamant TG:
Max. permissible ball
load
50kg
60kg
75kg
90kg
Diamant TG +1:
Max. permissible ball
load
50kg
60kg
75kg
90kg

COUPLING REQUIREMENTS

WARNING!
Personal injury is possible due to breakage of the trailer coupling.
The coupling could break if the bike carrier is fitted to a coupling made of a
too soft material.
 Fit the bike carrier only to a coupling made of steel St52, grey cast iron
GG52 or higher quality.
 Never fit the bike carrier to a
coupling made of aluminium,
other light metals or plastic.
 Only suitable for use on the
coupling of a passenger car.
 Note the instructions of the
coupling manufacture.
Fit the bike carrier only to trailer couplings with the following properties:
Material:
D-value:
Tow ball:
Weight bike carrier
17kg
17kg
17kg
17kg
Weight bike carrier
19,5kg
19,5kg
19,5kg
19,5kg
min. steel St52 or grey cast iron GG52
>7,6 kN
Ø50mm (class A-50 according EC 94/20 or ECE R55)
49
Max. carrying
capacity
33kg
43kg
58kg
Max. 60kg
Max. carrying
capacity
30,5kg
40,5kg
55,5kg
Max. 60kg