Dismantling The Bike Carrier; Cleaning And Maintenance - PROUSER DIAMANT TG Notice D'assemblage

DISMANTLING THE BIKE CARRIER

To dismantle the bike carrier, proceed in the reverse order to fitting:
 Unlock the license plate holder and turn it to the storage position.
 Fold the bike carrier together.
 Remove lighting connector from the car.
 Release the quick-release lever and pull the wearer of the device.
1
The ingenious folding system makes it really easy to carry and to store.
CLEANING AND MAINTANANCE
Under normal conditions and use, the bike carrier only requires cleaning, and is
otherwise maintenance free.
The bike carrier can be cleaned with a mild cleaning agent, with warm water
and/or a soft cloth. First remove any coarse dirt and dust.
Do not use any solvents or similar cleaning agents, since these can
damage the bike carrier.
Leave the bike carrier to dry on its own. Do not use any electrical driers or other
heating equipment to speed up the drying process.
Clean the bike carrier regularly when used in coastal areas or in winter conditions
in order to wash off any salt and prolong the service life of the bike carrier.
Store the bike carrier in a dry and protected area when not used for extended
periods (e.g. over winter) in order to prolong the service life of the bike carrier.
Check the bike carrier for wear before the start of every journey.
2
61
3