Publicité
Les langues disponibles
Les langues disponibles
resistance measurements
WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capa-
citors before taking any resistance measurements. Remove the batteries and unplug the line cords.
1
Set the function switch to the Ω CAP
Insert the black test lead banana plug into the negative com jack. Insert
2
the red test lead banana plug into the positive Ω jack.
3
Press the mode button to indicate "
4
Touch the test probe tips across the circuit or part under test. It is best to
disconnect one side of the part under test so the rest of the circuit will not
interfere with the resistance reading.
5
Read the resistance on the display.
position.
" on the display.
68
Publicité
