Beta 1760/OHM Mode D'emploi page 61

AC +DC Alternating current + Direct current
TRMS True RMS
STO Store
RCL Recall
AUTO Autoranging
Timing symbol
Backlight
Bar graph
: While testing the insulation resistance, the symbol "
voltage is over 30V.
While testing the insulation resistance, the symbol "
buzzer warns continually if the outer voltage is over 30V. the symbol "
displayed while LO Ω≤35Ω and the buzzer warns continuously.
LOCK Push down the "LOCK" button when you are testing the insulation resistance. The
meter will enter the insulation resistance status and the symbol "
LOBAT: The display shows "LOBAT" when the voltage drops below 7.5V
HOLD The current value is maintained.
V, MΩ, Ω The measured dimension units
61
" flashes frequently if the
" flashes frequently and the
" is indicated.
" is