TechniSat DIGITRADIO 600 Mode D'emploi page 15

4.4.7 Switching off the device
> Using the On/Standby button on the remote control you can switch the device to standby; the date and
time appear.
5 Menu operation
Menu navigation primarily takes place using the MENU, tuqp and OK buttons.
Alternatively, you can rotate or press SCROLL&SELECT on the device.
The menu is divided into the respective submenu for the currently selected source and the main menu.
To navigate in submenus, either press the OK button or alternatively the u button.
* highlights the current selection.
You can go back one step by pressing the MENU or t button.
Close menu: press MENU again or wait for approx. 15 seconds.
5.1 Main menu
The main menu takes you to all the functions and settings for the DIGITRADIO.
> Press the MENU button to access the main menu.
If you are currently in a playback source, you can use the MENU button to access the submenu for this
source. To reach the main menu, while in the open submenu use the p or q buttons to select the Main
menu item and press OK.
5.2 Source selection
> Press the MODE button as often as required until the desired source is shown on the display.
Alternatively:
> Press the MENU button.
28
If you are in a submenu, select the Main menu as described in Section 5.1.
> Using the p or q buttons, select the desired source and confirm your selection with OK.
6 Internet radio
The DIGITRADIO is equipped with an Internet radio receiver. In order to receive Internet radio stations/channels,
you need a WLAN router with Internet access or a LAN connection cable.
> Press the MODE button as often as required until Internet Radio is shown on the display.
Alternatively:
> Press the MENU button and select Internet Radio in the main menu.
If you are in a submenu, select the Main menu as described in Section 5.1.
If you are starting the Internet radio mode for the first time without having configured a LAN/WLAN
connection during the initial set-up, the search wizard appears which shows you all the WLAN stations
within range, as well as the Cable option. Select the network using the OK button and, if required, enter
the password using the keyboard displayed. Then select
password entered is correct, a connection to the network is now established.
To cancel the entry, select and press the OK button.
If you make a typing error you can delete the last letter entered using
EN
FR
IT
NL
NW
and press the OK button. If the
DK
. PL
CZ
SK
29