Publicité
Les langues disponibles
Les langues disponibles
60. It activates the timing and switches off the zone after 60 minutes.
90. It activates the timing and switches off the zone after 90 minutes.
Heating stages *. The available parameters are:
Air: Only uses air stage.
Radiant: Only uses radiant air.
Air+Radiant: The system combines both stages to reach comfort quickly and efficiently.
Note: For security reasons, the zone will turn off after changing any setting.
* Available based on the installation and system setting.
Lite Settings. To save energy, enables to configure the wired Airzone Lite to switch off after a few second.
Note: To access the Lite settings, go to a zone controlled by a Lite thermostat through the zone navigation menu.
THINK THERMOSTAT
Operation Mode
Zone/ Current Room
Temperature/ Relative
humidity
Setting parameters
Zone demand
Local ventilation
Home screen/ Heating
or Cooling Set Point
temperature
Remember: Use
Setting Parameters
Press
to access the menu:
Operation Mode. This parameter is only available when the Think thermostat is configured as main, the available modes are:
Cool. The conditioning unit will start a cooling cycle any time that any zone is in cool demand (T
Heat. Enables the heating cycle whenever a zone is in heating demand (T
Auto. The Auto mode allows automatic switching between cool and heat, depending on the global demand.
Dry. In this mode, the air-conditioning unit will start a dehumidification cooling cycle any time that any zone is under
demand (T
< T
).
Set-Point
room
Note: Dry mode decreases humidity in the room by entering the dehumidification cooling cycle.
to confirm and
for going back if browsing submenus.
User Mode
Airflow
Control bar
Current Set Point
Timer
On/Off
Set-Point
> T
).
Set-Point
room
< T
).
room
34
Publicité
