ETHERNET/WIFI CLOUD WEBSERVER (AZZBSWSCLOUD [C/R])
AZZBSWSCLOUDC
AZZBSWSCLOUDR
Fig. 36
All Airzone systems must be connected to internet to offer technical support.
It is only necessary to connect one Webserver Cloud per installation (control of up to 32 systems).
Assembly
The Webserver is integrated into the automation bus of the Control board
(Fig. 37). It has a 5-pin terminal. Disconnect the terminal and fit the connector.
Connection
To connect with other sys
connect the Webserver Cloud to the domotic bus of the main board. Use the proper
cable: shielded twisted pair 2 wired: 2x0.22 mm
with the terminal screws following the color code (Fig. 38).
AZZBSWBSCLOUDC
N
Ethernet
WiFi USB connector and antenna
Automation bus output
Automation bus input
(Fig. 37), use the 2-pin terminal to
2
(AWG 24 2 wired). Attach the wires
Description
Fig. 37
Fig. 38
26