Publicité
Les langues disponibles
Les langues disponibles
CAUTION
Observe the position of the wall bracket
Alignment of the wall bracket must be under-
taken according to the axis in the picture
Failure to comply with correct alignment will
compromise mechanical safety
We recommend using a counter-plate on
lightweight construction walls (not included
with delivery).
Make 4 bore hole markings (10mm dia. min.);
consider the position of opening A for the elec-
trical connection
Check the distances between them
Drill holes and blow out with a bellows
Hold the ceiling bracket on the ceiling and
hammer
4 fastening anchors using a hammer
Tighten the fastening using manufacturer
instructions
All manuals and user guides at all-guides.com
A
in
the
DANGER
Electric shocks are life-threatening.
Switch off the fuse before working on the
power connection
This device may only be connected to a
mains power supply with a protective earth
conductor (PE) to prevent any risk of an elec-
tric shock
Create the power connection
3
4
metric
Place wall angle 1 (with end ring 2 and hood 3
in position) in the wall bracket 4 and simultane-
ously pull plug through the rectangular cutout
6
1
metric
4
metric
2
Wall angle in vertical alignment, mount with
M8 self-locking 1 bolt and nut and tighten
slightly
ENG
3
2
1
29
Publicité
