Alesis PHOTON 25 Manuel D'utilisation Du Propriétaire page 6

MIDI OUT Connector
5.
OUT of the Photon 25 to the INPUT of an external MIDI device.
The operation of the MIDI OUT port changes depending on whether or not a
USB cable is connected to the Photon.
● USB cable connected:
MIDI data from your computer is
passed to the MIDI OUT port.
Note: When a USB cable is
connected, you should activate
"MIDI echo" in your sequencer if
you want the Photon to control
another MIDI device.
● USB cable not connected:
Whatever you play on the
Photon is sent to the
MIDI OUT port.
Note: If you have another device
connected to the Photon's MIDI IN port, that device's MIDI
information will be ignored.
Sustain Pedal Input
6.
any manufacturer's sustain pedal: when you turn on the Photon 25, it will
automatically calibrate itself to the pedal.
4
– Use a five-pin MIDI cable to connect the MIDI
– Connect a keyboard sustain pedal (not included). Use
USB data from
the computer
MIDI data from the
Photon (or an external
controller connected
to the Photon's
MIDI IN port)