Configuration - Festo CPV GE-IP-8 Serie Brève Description

3

Configuration

Warning
S Make sure that switch−on test pulses are sup
pressed/switched off if you operate the CPV Direct
via a Fail safe I/O module."
S Check the measures required for putting your system
into a safe status in the event of an EMERGENCY
STOP.
Further information can be found in the manual
P.BE−CPV−DI−IP−.. .
Caution
The CPV Direct contains electrostatically sensitive com
ponents. The CPV Direct will be damaged if you touch
the contact surfaces of the plug connectors or if you do
not observe the regulations for handling electrostati
cally sensitive components.
The CPV Direct represents an analogue output module
within the IP link. Two data models are available for the
configuration:
compact: 2 output bytes (16 O)
complex: 3 output bytes and 3 input bytes (24 O, 24 I).
Festo CPV..−GE−IP−8 0211NH English 15