Set The Clock And Date; Set The Other Optional Settings - Kenwood DPX-M3300BT Mode D'emploi

Getting Started
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour" "Minute".
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of "Day"
"Year".
11
Press and hold to exit.
To return to the previous setting item, press
3

Set the other optional settings

You can only set the following items while the unit is in STANDBY source.
1 Press B SRC repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
3
Turn the volume knob to select an item (see the following table), then
press the knob.
4
Repeat step 3 until the desired item is selected or activated.
5
Press and hold to exit.
To return to the previous setting item, press
"Month" "Year" or "Month" "Day"
.
.
[AUDIO CONTROL]
[SWITCH PREOUT] (Applicable only if [X'OVER] is set to [2WAY].) (Page 6)
[REAR]/[SUBWOOFER]: Selects whether rear speakers or a subwoofer
are connected to the line out terminals on the rear (through an external
amplifier). (Page 27)
[DISPLAY]
[EASY MENU] When entering [FUNCTION]...
[ON]: [LCD DISPLAY] illumination changes to white color. ;
[OFF]: [LCD DISPLAY] illumination remains as [COLOR SELECT] color.
(Page 23)
• [KEY 1] and [KEY 2] illuminations change to light blue color when you
enter [FUNCTION], irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 23 for zone identification.
[TUNER SETTING]
[PRESET TYPE] [NORMAL]: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/MW/LW). ; [MIX]: Memorizes one station for each preset
button, regardless of the selected band.
[SYSTEM]
[KEY BEEP] (Applicable only if [X'OVER] is set to [2WAY].) (Page 6)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[SOURCE SELECT]
[BT AUDIO SRC]
[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables. (Page 17)
[BUILT-IN AUX] [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 11)
[P-OFF WAIT] Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ;
[– – –]: Cancels.
Default: [XX]
5
ENGLISH