Kenwood DPX-M3300BT Mode D'emploi page 29

Audio Settings
[SUBWOOFER LPF] [SW LPF FRQ]
[SW LPF SLOPE]
[SW LPF PHASE] [REVERSE] (180°)/[NORMAL] (0°)
[SW LPF GAIN]
• [SUBWOOFER] of [SPEAKER SIZE] and [SUBWOOFER LPF] of [X'OVER] is selectable
only when [SWITCH PREOUT] is set to [SUBWOOFER] (page 5) and
[SUBWOOFER SET] is set to [ON] (page 19).
3-way crossover setting items
[SPEAKER SIZE]
[TWEETER] [SMALL]/[MIDDLE]/[LARGE]
[MID RANGE] [8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/[18CM]/[4×6]/
[5×7]/[6×8]/[6×9]
[WOOFER] [16CM]/[20CM]/[25CM]/[30CM]/[38CM OVER]/[NONE]
(not connected)
[X ' OVER]
[TWEETER] [HPF FRQ]
[SLOPE]
[PHASE]
[GAIN]
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/
[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/
[220HZ]/[250HZ]/[THROUGH]
[–6DB]/[–12DB]/[–18DB]/[–24DB]
[–8] to [0]
[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/
[6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]
[–6DB]/[–12DB]
[REVERSE] (180°)/[NORMAL] (0°)
[–8] to [0]
[MID RANGE] [HPF FRQ]
[HPF SLOPE]
[LPF FRQ]
[LPF SLOPE]
[PHASE]
[GAIN]
[WOOFER] [LPF FRQ]
[SLOPE]
[PHASE]
[GAIN]
• [WOOFER] of [SPEAKER SIZE] and [WOOFER] of [X'OVER] is selectable only when
[SUBWOOFER SET] is set to [ON]. (Page 19)
Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to create a
more suitable environment for your vehicle.
• For more information, see "Determining the delay time automatically" on
page 22.
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/
[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/
[220HZ]/[250HZ]/[THROUGH]
[–6DB]/[–12DB]
[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/
[6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]/[THROUGH]
[–6DB]/[–12DB]
[REVERSE] (180°)/[NORMAL] (0°)
[–8] to [0]
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/
[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/
[220HZ]/[250HZ]/[THROUGH]
[–6DB]/[–12DB]
[REVERSE] (180°)/[NORMAL] (0°)
[–8] to [0]
ENGLISH
21