Publicité
Les langues disponibles
Les langues disponibles
Fitting instruction Superbike-Kit
Model: Yamaha FZR 600 R
Type: 4JH
Important:
If you are not a trained motorcycle mechanic stop now. Ask a local motorcycle shop to
do the work for you. Please read the LSL-Superbike-Kit Fitting instructions.
Code for cable routing:
in front of the fork
behind the fork
Recommended bar:
Length of brake-line:
Throttle cable: (1)
Clutch cable: (2)
-Line:
Choke cable:
Instructions:
Install the top yoke with the two washers both under the top yoke.
Take of the fairing bracket running to the tank. Cut it at a heights that it only takes the fuel
tank. Shorten the upper bracket about 5mm behind the second mirror fixing hole.
You are able to order a precut screen separate. Then cut the fairing to the level of the
precut screen.
Wire the cables as described above. Lead the electrical cables down at the fork stanchions.
Fix the hydraulic reservoir at the new 90°-bracket. Cut fluid hose by 10mm to make the
position tension free.
If handlebar type 01 (L01 / A01 / E01) is chosen: For better lining of the cables fix the
grips about 10mm from the bar's end. To replace the original mirrors use mirrors for
fitting at the handlebar.
Position of cable from riders position
right from steering head
F
left from steering head
B
AN1 / LN1, A01 / E01 / L01
82 & 90 cm (BK05)
F / L
(2)
F / L
- / -
LSL-Motorradtechnik GmbH • D-47809 Krefeld
www.lsl-motorradtechnik.de
Year: '94 - ´95
R
L
120Y057
(1)
Publicité
