Sony SDM-E76A Mode D'emploi page 36

2
Press the m/M buttons to select R (Red) or B (Blue)
and press the OK button. Then press the m/M
buttons to adjust the color temperature and press
the OK button.
Since this adjustment changes the color temperature by
increasing or decreasing the R and B components with respect
to G (green), the G component is fixed.
3
Press the m/M buttons to select
OK button.
The new color setting is stored in memory for USER and
automatically recalled whenever USER is selected.
The main menu appears on the screen.
Changing the gamma setting
(GAMMA)
You can associate the picture's color shade on the screen with the
picture's original color shade.
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the m/M buttons to select
press the OK button.
The GAMMA menu appears on the screen.
3 Press the m/M buttons to select the desired mode
and press the OK button.
Adjusting the sharpness
(SHARPNESS)
Adjust to sharpen the edge of images, etc.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the m/M buttons to select
and press the OK button.
The SHARPNESS menu appears on the screen.
3
Press the m/M buttons to adjust the sharpness and
press the OK button.
Changing the menu's position
(MENU POSITION)
You can change the menu position if it is blocking an image on
the screen.
1
Press the MENU button.
The main menu appears on the screen.
2
3
, then press the
Changing the input automatically
(INPUT SENSING)
(SDM-E76D/SDM-E96D only)
When you select AUTO ON in the INPUT SENSING menu, the
monitor automatically detects an input signal to an input terminal,
and changes the input automatically before the monitor goes into
the power saving mode.
1 Press the MENU button.
2 Press the m/M buttons to select
3 Press the m/M buttons to select the desired mode
(GAMMA) and
(SHARPNESS)
13
(GB)
Press the m/M buttons to select
POSITION) and press the OK button.
The MENU POSITION menu appears on the screen.
Press the m/M buttons to select the desired position
and press the OK button.
There are three positions each for the top, center and bottom
of the screen.
The main menu appears on the screen.
SENSING) and press the OK button.
The INPUT SENSING menu appears on the screen.
and press the OK button.
• AUTO ON:
When the selected input terminal has no
input signal, or when you select an input
terminal by the INPUT button on the
monitor and the terminal has no input
signal, the on-screen message appears
(page 16) and the monitor checks the input
signal to another input terminal
automatically to change the input.
When the input is changed, the selected
input terminal is displayed on the left upper
of the screen.
When there is no input signal, the monitor
goes into the power saving mode
automatically.
• AUTO OFF: The input is not changed automatically.
Press the INPUT button to change the
input.
(MENU
(INPUT