Sony SDM-E76A Mode D'emploi page 34

Adjusting the black level of an
image (BRIGHTNESS)
Adjust the picture brightness (black level).
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the m/M buttons to select 8 (BRIGHTNESS)
and press the OK button.
The BRIGHTNESS menu appears on the screen.
3
Press the m/M buttons to adjust the brightness and
press the OK button.
Adjusting the picture's sharpness
and centering (SCREEN)
(analog RGB signal only)
x Automatic picture quality adjustment
function
When the monitor receives an input signal, it
automatically adjusts the picture's position and
sharpness (phase/pitch), and ensures that a clear
picture appears on the screen (page 15).
Notes
• While the automatic picture quality adjustment function is activated,
only the 1 (power) switch will operate.
• The picture may flicker during this time, but this is not a malfunction.
Simply wait a few moments until the adjustment completes.
If the automatic picture quality adjustment function of
this monitor seems to not completely adjust the picture
You can make further automatic adjustment of the picture quality
for the current input signal. (See AUTO ADJUST below.)
If you still need to make further adjustments to the
picture quality
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the display receives the same input signal.
These settings may have to be repeated if you change the input
signal after reconnecting your computer.
x Make further automatic adjustments to the
picture quality for the current input signal
(AUTO ADJUST)
Set the optimum phase, pitch and horizontal/vertical position for
the current input signal.
1
Press the MENU button.
The main menu appears on the screen.
2
Press the m/M buttons to select
press the OK button.
The SCREEN menu appears on the screen.
3
Press the m/M buttons to select AUTO ADJUST and
press the OK button.
The AUTO ADJUST menu appears on the screen.
4
Press the m/M buttons to select OFF or ON and
press the OK button.
• OFF:When OFF is selected and the OK button is pressed,
AUTO ADJUST makes the appropriate adjustments
and its values are stored in the memory.
Note
AUTO ADJUST works automatically when the received
resolution is different from the stored one in the monitor.
• ON: When the monitor is turned on or the input signal is
changed, AUTO ADJUST makes the automatic
adjustments.
5
Press the m/M buttons to select
OK button.
Return to the menu screen.
x Adjust the picture's sharpness manually
(PHASE/PITCH)
You can adjust the picture's sharpness as follows. This
adjustment is effective when the computer is connected to the
monitor's HD15 input connector (analog RGB).
1 Set the resolution to 1280 × 1024 on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, and display the test pattern.
For Windows User
When Auto run operates:
Click Display Adjustment tool (Utility).
Click "Adjust" and confirm the resolution and then click
"Next".
Test pattern for PITCH and PHASE appears in order.
When Auto run fails to operate:
1 Open "My Computer" and right click the CD-ROM icon.
Go to "Explorer" and open the CD-ROM icon.
2 Open [Utility] and then select [Windows].
3 Start [Win_Utility.exe].
Test pattern appears.
For Macintosh User
1 Open [Utility] and then select [Mac].
2 Start [Mac_Utility.exe].
Test pattern appears.
4 Press the MENU button.
The main menu appears on the screen.
5 Press the m/M buttons to select
press the OK button.
The SCREEN menu appears on the screen.
6 Press the m/M buttons to select PHASE and press
the OK button.
The PHASE adjustment menu appears on the screen.
11
(GB)
(SCREEN) and
and press the
(SCREEN) and