-
Protection class II ( ), continuous double or reinforced insulation,
-
Contamination class: 2,
-
Length: 1.4 m, AWG 18,
-
Ambient conditions:
Maximum barometric height for measurements: 2000 m,
Temperature: 0 °C to + 50 °C, humidity 50 % to 80 %
-
Only use the test leads if in perfect and clean condition as well as according
to this manual, since the protection provided could otherwise be impaired.
-
Replace the measuring leads, if the insulation is damaged or if the con-
ductor/connector is interrupted.
-
Do not touch the bare contact tips of the measuring leads. Only touch the
area intended for your hands!
-
Insert the bent terminals into the testing or measuring device.
11. Environmental note
At the end of product life, dispose of the unserviceable device via
appropriate collecting facilities provided in your community.
04/ 2019
BENNING CM 1-3
16