Écran D'accueil; Panneau De Commande Shield - Lochinvar SHIELD SWR125 Manuel D'installation

9
Mise en service
Le panneau de commande (FIG. 9-4) sert à régler la température, à sélectionner le mode de fonctionnement et à afficher l'état
du chauffe-eau.
Figure 9-4 Panneau de commande
• Press to reset the water heater
when in a lockout
• Press to select the next menu item
• Press to store paramater data after
paramater programming
• Press to exit Service Mode
Écran d'accueil
Th e Home Screen can be used to view the current operating information of the Shield water heater. Th e ▲ and ▼ buttons can
be used to page through the screen sequence, displaying various operating statistics.
Figure 9-5 Séquence d'écrans
(suite)

Panneau de commande Shield

• Press to select various operating
data
• Press to adjust parameters in
menus
Manuel d'installation et d'entretien
- Indicates that the unit has a Space Heating demand.
- Indicates that the unit has a DHW demand. This icon will flash if
the unit has a Pre-heat demand (if enabled).
- Indicates the burner is firing and a flame signal is detected.
- Indicates that the unit is running in Service Mode.
- Indicates that Freeze Protection is active.
55