Battery - SPORTSTECH WRX400 Manuel D'utilisation

BATTERY

Batteries are not included.
1. The monitor uses 2 "AA" battery. You can replace the battery through the back of the unit.
2. Battery must be correctly positioned and make sure the battery spring is properly in contact with
battery.
3. If the display is illegible or only partial segment appeares, please take out the battery and wait for
15 seconds, then reinstall it.
ADVICE FOR HANDLING BATTERIES
1. Remove the batteries when they are exhausted or if you do not use the product for an extended
period of time in order to avoid hazards through leaking batteries.
2. Do not recharge batteries nor dissemble or throw then into fire. Danger of explosion!
3. Pay attention to the polarity (+) and (-). Always replace all the batteries; do not mix old and new
batteries, or different battery types.
4. Use preferably alkaline batteries, as they have a longer operation time then usual zinc-coal-
batteries.
5. A change of batteries is necessary when the display becomes weaker or completely faded.
HOW TO REPLACE THE BATTERIES OF COMPUTER
1. If you see an improper display on the monitor, please replace the batteries to have a good result.
2. Please use 2 pieces of 1.5v AA batteries as a power supply. (See step 5)
9. BATTERY
38