Operation Instructions - Pleasant Hearth OFG418TA Mode D'emploi

ASSEMBLY INSTRUCTIONS
16. Seat and position the propane cylinder in the
bottom plate (I).
17. Before connection, be sure that there is no debris
caught in the outlet of the gas cylinder, inlet of the
regulator valve or in the outlet of the burner and burner
ports. Ensure the propane cylinder valve is turned off.
Fasten the cylinder with the propane tank strap (J). Then
connect the regulator (R) to the cylinder as shown in
figure 17.
WARNING: Do not allow to tip or fall over, as fire, damage to property, or serious injury could
occur. The fire pit must remain upright, as illustrated, at all times.

OPERATION INSTRUCTIONS

Before connection, be sure that there is no debris caught in the outlet of the gas cylinder, inlet of the
regulator valve or in the outlet of the burner and burner ports. Keep the propane cylinder valve closed
and disconnect the propane cylinder from the regulator valve when the fire pit is not in use.
16
I
17
19
J
R