Eskimo QuIckflIp 2 Instructions De Montage page 8

More ice fisherman choose Eskimo than any other brand
Quickflip 2 (69167), Quickflip
™
fOR QuICKflIP 3 ONly
1. Attach (2) seat kit mount brackets (68430) to each hinge assembly using
(4) provided 1/4-20 x 3/4" hex head bolts and nyloc nuts. Make sure the
mount brackets are positioned in the correct hole locations so seat brace
and seat positions are correct later in instructions. SEE fIGuRE 4.
2. Attach (2) base tubes (68441) to the top side of seat kit mount brackets
using (4) provided 1/4-20 x 1-3/4" bolts, nyloc nuts and (8) washers. SEE
fIGuRE 5A.
3. Attach seat brace (68440) to bottom of rear brace tube using (2) provided
1/4-20 x 2-1/4" bolts, nyloc nuts and (4) washers. SEE fIGuRE 5A.
(4) 1/4" x 1-3/4" bolts
all washers are 1/4"
base tubes
seat kit mount bracket
all nuts are 1/4"
fIGuRE 5A
Page 8
3 (69168) & Express
™ ™
seat brace
GetEskimo.com
2 (69802)
hinge
(2) 1/4" x 3/4" bolts
fIGuRE 4 (right side shown)
®
seat kit mount bracket
(2) 1/4" nuts
(2) 1/4" x 2-1/4" bolts
1-800-345-6007