Long Term Storage - Eskimo QuIckflIp 2 Instructions De Montage

Masquer les pouces Voir aussi pour QuIckflIp 2:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

More ice fisherman choose Eskimo than any other brand
Quickflip
2 (69167), Quickflip
SET-uP AND TAKE-DOWN INSTRuCTIONS
SET-uP: From the outside or inside of shelter depending on your
preference, start with the bottom cross brace pole and pull out all
cross brace poles and snap into place. As you pull out each cross
brace pole and snap into place, flip all cross braces over to the in use
position. Secure all spreader poles in between all cross brace poles
by snapping C-clips over cross brace poles.
By removing the back spreader pole and the top back spreader pole,
you can flip the shelter back halfway and use it as a wind break on
nice days.
TAKE-DOWN: Close all window covers, vent covers and zip door
shut. Remove all spreader poles and place in bottom of sled. Starting
with the rear cross brace, push snap buttons in and retract all cross
brace poles to their shortest length. Work from the rear cross brace
to the front cross brace that lies on the ground/ice. Flip all poles back.
use extreme caution when flipping poles for transport position
and make sure no part of the skin gets pinched, caught or stuck be-
tween any poles or in any pinch points. Fold excess skin inside sled
when complete.
NOTE: use extreme caution so you don't rip or tear any por-
tion of the skin, especially around the hinges or any pinch
point areas.

lONG TERm STORAGE

• Always make sure your ice shelter is completely dry before storing
for long periods of time. Storing your ice shelter when damp or wet
may cause mold and mildew damage.
• Remove skin, padded seats and padded backrests from ice shel-
ter sled and poles. Clean all salt, moisture and debris from your
shelter skin
• Store skin, padded seats and padded backrests in a cool, dry
place away from rodents.
• Clean all salt, moisture and debris from the sled and poles of your
shelter. Wipe down poles with WD-40® or similar types of silicon to
deter from corrosion.
NOTE: Before attaching skin for use, re-wipe the poles to
remove excess WD-40® or silicon substance to deter from
damage to your skin.
• Store poles and sled in a cool, dry place.
1-800-345-6007
3 (69168) & Express
GetEskimo.com
2 (69802)
®
Page 13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Quickflip 3Express 2691676916869802

Table des Matières