Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.
Remove Fascia: e) Open trunk to access taillights. Using plastic trim tool, remove cover panels from taillight. Using 10mm socket, remove lowest fastener from under taillight cover.
Using Phillips screwdriver, remove two visible fasteners from lower trunk opening.
Cover panels to remove
Fasteners to remove
2.
Remove fascia: f) Using flat head screwdriver, remove (2) rivets from bottom of
fascia, both sides.
© 2022 Horizon Global™ Corp. - Printed in Mexico
2.
Remove fascia: g) Using plastic trim tool, unclip fascia from vehicle. Disconnect
wiring if equipped. Remove fascia by pulling rearward and set aside in safe place.
Sheet 7 of 27
76929NP
09-13-22
Rev. A
Publicité
Table des Matières
