Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Always wear SAFETY GLASSES
when installing hitch
DO NOT CUT WIRES!!!
Trim modification for models with kick sensor:
1.
DO NOT CUT WIRES! Use flat head screwdriver to remove wiring from kick sensor. Secure wiring to side of fascia with tape. Using die grinder trim fascia and kick sensor bracket in
area shown in Figure 3.
2.
After trim, using cable ties ⑪, secure wiring to kick sensor in direction of arrow.
© 2022 Horizon Global™ Corp. - Printed in Mexico
Installation Instructions
PART NUMBERS: 76929
Figure 3
4.25"
Centerline
DO NOT CUT WIRES!!!
11.00"
Wire
Sheet 5 of 27
76929NP
09-13-22
Rev. A
Publicité
Table des Matières
