Additional Equipment; Tools Required - R&G CP0295 Mode D'emploi

11
Page | 3

ADDITIONAL EQUIPMENT

TOOLS REQUIRED


Socket set to include 14 and 2x19mm sockets and wrenches.

Set of metric Allen keys to include 4 and 8mm A/F.

Torque wrench (up to 40Nm).
LEGEND
ITEM 1 = B0061 with CS340 (12mm) (BOTH CRASH PROTECTORS) (x2).
ITEM 2 = M12x1.25x80mm LONG HEX HEAD BOLT (L-H-S CRASH PROTECTOR BOLT) (x1).
ITEM 3 = M12 PLAIN WASHERS (x2).
ITEM 4 = LW0001 (M12 SHAKE PROOF WASHERS) (x2).
ITEM 5 = S0418 SPACER AERO SHAPED (L-H-S) (x2).
ITEM 6 = M0282 MOUNTING BLOCK (L-H-S) (x1).
ITEM 7 = M10x1.25x90mm LONG CAP HEAD BOLT (FRAME BOLT L-H-S) (x1).
ITEM 8 = M0283 MOUNTING BLOCK (R-H-S) (x1).
ITEM 9 = M12x1.25x60mm LONG HEX HEAD BOLT (R-H-S CRASH PROTECTOR BOLT) (x1).
ITEM 10 = M10x1.25x110mm LONG CAP HEAD BOLT (FRAME BOLT R-H-S) (x1).
ITEM 11 = SB081 SPANNING BAR (x1).
ITEM 12 = BC0002 CRASH PROTECTOR CAPS (x2) (NOT SHOWN).
PICTURE 'D' PICTURE 'E'
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com