ShelterLogic 26'W x 12'H Peak Shelter Manuel D'assemblage page 7

7. INSTALL TOP RAIL:
As with the Side Cross Rails, Use #11104 and #11102 Rails to make the Top Cross Rail:
A. Place the first rail (#11104) under the end rib and secure it with bolt #11134 as shown in
tigHteN this bolt.
B. Connect the rails to each other, laying the #11102 cross rails over the middle ribs. Use bolt #11133.
C. Place the last rail under the rear end rib. HAND-tigHteN this bolt.
Fig.7A
11134
800383
00690
8. SQUARING UP THE FRAME
A. Be sure the frame is in its final location, which
needs to be as flat and level as possible.
B. Measure across opposite corners.
these distances must be equal to within 1 inch.
C. Check that the front and rear of the frame
measures 26 feet in width.
Fig.8
11102
11104
26 ft.
Page 7
Fig.7A
. HAND-
11133
00690
26 ft.
05_10A153_D6
Fig.7B
Fig.7B