ShelterLogic 26'W x 12'H Peak Shelter Manuel D'assemblage page 5

3. ASSEMBLE MIDDLE RIBS
Assemble middle ribs as shown in Fig. 3. Securely
fasten all of the joints with the hardware indicated.
800387
11131
00690
800859
Fig.3
4. INSTALL SIDE RAILS AND SHELTERLOCk
A. Place assembled first end rib in the staked area. Place the ShelterLocks
as shown in Figure 4. From the outside of the rib insert the bolt through the upright and then through the
ShelterLock .
®
B. Place the first Side Rails (11104) over the
bolts and nest them into the ShelterLocks
Install the nut onto the bolt and HAND
tigHteN tHe BOLt tHAt CONNeCtS tO
tHe eND RiB.
NOTE: Sliding Cover Rails (11105) should be
attached to frame after Step 8, once cover is
placed over the frame. See Step 9.
800384
800434
800386
800387
800859
.
®
Fig.4
800383
800391
800390 800389
Use #11131
5/16" x 2 3/4" L
Bolts
®
STABILIzERS:
800454
Page 5
800384
800434
800859
(800372) on the uprights
®
11104
800372
00690
800386
800387
11104
05_10A153_D6