ShelterLogic 26'W x 12'H Peak Shelter Manuel D'assemblage page 4

26'x20'x12' is the base frame dimension. Your model may have more middle ribs than shown in the illustration on pg.3.
You will receive one extra rib for every extra 4 ft. of building length that you purchase. The basic frame assembly will
remain the same. The cover will be the correct size for the length of the building.
1. PLOTTING THE FRAME:
Before building your shelter, you should choose a flat area on
your property and plot your shelter.
A. Stake out the area for the shelter in the desired spot. The width of
the area should be at least equal to the width of the shelter and the
length should be equal to the length of the shelter Fig. 1.
B. Measure diagonally from corner to corner (A & B). These
measurements should be the same. If they are not equal the stakes
need to be adjusted until the width, length and inside measurements
are correct.
2. ASSEMBLE END RIBS
Assemble end ribs as shown in Fig. 2. Securely
fasten all of the joints with the hardware indicated.
Fig.2
800434
800386
NOTE: FRAME EXTENSION kIT
800384
800390
800388
800383
800391
800384
800389
Use #11131
5/16" x 2 3/4" L
Bolts
Page 4
26 ft.
WIDTH
A
B
800434
800386
800388
05_10A153_D6
BUILDING
LENGTH
Fig.1