Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
11. INSTALLING THE COVER ON THE FRAME - continued
E. After cover is centered on frame, insert a Cover Rail (#11105) into each pocket on the inside of the cover in
the roof.
F. Use 3-Way (#11106) and 4-Way (#11107) Clamps to connect them to the ribs. Hand-tighten bolts (#11130).
See Figure 11F.
NOTE: to avoid damage to fabric, face bolt heads towards cover.
G. Using cover rails, pull top portion of cover tightly downward and outward from the
center and tighten bolts.
End Rib Cross Rail Clamps
11106
11130
00690
Page 11
Middle Rib Cross Rail Clamps
11107
11130
00690
Fig.11F
COvER NOT
SHOWN FOR
CLARITY.
05_10A153_D6
Publicité
Table des Matières
