Screen - Sony Bravia KDL-46R470A Mode D'emploi

Dual Sound
Speakers
Audio Out
Advanced Settings

Screen

Wide Mode
Auto Wide
4:3 Default
Auto Display Area
30
GB
Sets the sound from the speaker for a stereo or bilingual broadcast.
"Stereo"/"Mono": For stereo broadcasts.
"Main"/"Sub"/"Mono": For bilingual broadcasts, select "Main" for sound
channel 1, "Sub" for sound channel 2, or "Mono" for mono channel, if available.
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono".
The sound becomes monaural, but the noise is reduced.
• The "Dual Sound" setting is memorized for each programme position.
• You cannot listen to stereo broadcast sound when "Mono" is selected.
z • If you select other equipment connected to the TV, set "Dual Sound" to "Stereo",
"Main" or "Sub". However, when the external equipment connected to the HDMI
jack (except HDMI 1) is selected, this is fixed to "Stereo".
"TV Speakers": Turns on and outputs the TV's sound from the TV speakers.
"Audio System": Turns off the TV speakers and outputs the TV's sound from
external audio equipment connected to the audio output jacks on the TV.
You can also turn on the connected equipment that is compatible with BRAVIA
Sync Control, after making the appropriate settings of BRAVIA Sync Control.
"Variable": When using an external audio system, volume output from audio
out can be controlled using the TV's remote.
"Fixed": The audio output of the TV is fixed. Use your audio receiver's volume
control to adjust the volume (and other audio settings) through your audio
system.
"Dynamic Range": Compensates for differences in the audio level between
different channels (only for Dolby Digital audio).
• The effect may not function or may vary depending on the programme regardless
of the "Dynamic Range" setting.
"Digital Audio Out": Sets the audio signal that is output from the DIGITAL
AUDIO OUT (OPTICAL) jack of the TV. Set to "Auto", when connecting
equipment compatible with Dolby Digital. Set to "PCM", when connecting
equipment not compatible with Dolby Digital.
"Downmix Mode": Set the downmix method of multi-channel to two-channel
sound.
• "Surround": Select to get best surround performance.
• "Stereo": Select to get a stereo output.
For details about wide mode, see page 13.
Automatically changes the wide mode according to the input signal from an
external equipment. To keep your setting, select "Off".
• "Auto Wide" is only available when watching programmes from video input, HDMI/
MHL and component input in format 480i or 576i.
z • Even if "Auto Wide" is set to "On" or "Off", you can always modify the format of the
screen by pressing
Selects the default screen mode for use with 4:3 broadcasts.
"Wide Zoom": Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original
image as much as possible.
"Normal": Displays conventional 4:3 broadcasts in the correct proportions.
"Off": Keeps the current "Wide Mode" setting when the channel or input is
changed.
"On": Automatically adjusts the display area based upon the content.
"Off": Turns off the "Auto Display Area". Choose one from the "Display Area"
options.
repeatedly.