Viewing Pictures From The Connected Equipment - Sony Bravia KDL-46R470A Mode D'emploi

Viewing pictures from the
connected equipment
Turn on the connected equipment, then press
f
to select the desired input source, then press
without any operation after pressing
z • You can select A, B, D, E and H by Input Select. If you want select the other input, please press
and select correctly.
Jacks/
Input symbol on screen
A, B, H
HDMI IN 1 (ARC)
HDMI IN 2/MHL
HDMI 1 or
HDMI 2
C
D
AUDIO/ VIDEO IN
Video
E
/ COMPONENT IN
or VIDEO IN
Component or
Video
F DIGITAL AUDIO OUT
(OPTICAL)
G
AUDIO OUT or i
I
HDMI 1 AUDIO IN
16
GB
/
. (The highlighted item is selected if 2 seconds pass
F f
/ .)
Description
Connect to the HDMI IN 1 or 2 jack if the equipment has an HDMI jack. The
digital video and audio signals are input from the equipment.
In addition, when you connect the equipment that is compatible with BRAVIA
Sync Control, communication with the connected equipment is supported. See
page 37 to set up this communication.
You can also connect your MHL (Mobile High-Definition Link) device to HDMI
IN 2/MHL using an MHL cable. In addition, when you connect BRAVIA Sync-
compatible equipment, communication with the connected device is
supported.
If connecting a digital audio system that is compatible with Audio Return
Channel (ARC) technology, use HDMI IN 1 (ARC). If not, an additional
connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.
• The HDMI jacks only support the following video inputs: 480i, 480p, 576i,
576p, 720p, 1080i, 1080p and 1080/24p.
• The HDMI jacks can support PC timing in HDMI PC mode. See page 31 for
supported PC input signal.
• Be sure to use only an authorized HDMI cable bearing the HDMI logo. We
recommend that you use a Sony HDMI cable (high speed type).
You can enjoy photo/music/video files stored in a Sony digital still camera,
camcorder or USB storage device (page 21).
Connect to the video jack
equipment, connect to the L (MONO) jack
Connect to the component jacks and the audio jacks
picture quality, component connection is recommended if your DVD player
has a component video output. When using the component video jack
the video jack , select "Video" in the "Video/Component Input" menu
(page 37).
• You cannot use the component video jack
same time.
Use an optical audio cable.
Connect with an audio cable or headphones. You can listen to TV sound
through your stereo system or headphones. You can select "Variable" or
"Fixed" in the "Audio Out" menu (page 30).
This input can be used as an HDMI 1 analogue audio input.
When connecting a device that has DVI jack, use its analogue audio out jacks.
to display the connected equipment list. Press
and the audio jacks
.
HOME
. If you connect mono
/ . For better
and the video jack at the
F
/
as