Sony Bravia KDL-46R470A Mode D'emploi page 45

Channels
The desired channel cannot be selected
• Switch between digital and analogue mode and
select the desired digital/analogue channel.
Some channels are blank
• The channel is for scrambled/subscription service
only. Subscribe to a pay TV service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
Digital channels are not displayed
• Contact a local installer to find out if digital
transmissions are provided in your area.
• Upgrade to a higher gain aerial.
General
The TV turns off automatically (the TV enters
standby mode)
• Check if the "Sleep Timer" is activated (page 36).
• Check if the "Duration" is activated by "On Timer"
(page 36) or "Photo Frame Settings" (page 35).
• Check if the "Idle TV Standby" is activated
(page 38).
Some input sources cannot be selected
• Select "Video Labels" and select "Always" of the
input source (page 37).
The remote does not function
• Replace the batteries.
HDMI/MHL equipment does not appear on "BRAVIA
Sync Device List"
• Check that your equipment is compatible with
BRAVIA Sync Control.
Cannot select "Off" in "BRAVIA Sync Control"
• If you have connected any audio system that is
compatible with BRAVIA Sync Control, you cannot
select "Off" in this menu. To change the audio output
to the TV speaker, select "TV Speakers" in the
"Speakers" menu (page 30).
Lost password
• Select the "PIN Code" settings on the "Parental
Lock" settings, then enter the following master
password: 9999.
45
GB