2: Connecting An Antenna/Cable/Vcr; 3: Preventing The Tv From Toppling Over - Sony Bravia KDL-46R470A Mode D'emploi

2: Connecting an
antenna/cable/
VCR
• Connecting cables are not supplied.
Connecting an antenna/cable
Antenna cable
Connecting an antenna/cable and VCR
AV cable
VCR
Antenna cable
Antenna cable
3: Preventing the
TV from
toppling over
1
Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2
Install a machine screw (M4, not supplied)
into the screw hole of the TV.
The length of the M4 machine screw differs
depending on the cord diameter. Please
refer to below illustration.
6-8 mm
TV
3
Tie the wood screw and the machine screw
with a strong cord (not supplied).
z • An optional Sony support belt kit is used to
secure the TV. Contact your nearest Sony
service centre to purchase a kit. Have your TV
model name ready for reference.
Screw M4
Cord
7
GB