Additional Information
Installing the accessories
(Wall-Mount Bracket)
x
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
x
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the Wall-Mount Bracket SU-WL400 (sold separately).
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook.
x
For KDL-46R470A/46R450A only
Before installing the Wall-Mount Bracket, attach the Attachment parts for Wall-Mount Bracket (supplied)
to the rear of the TV, using the supplied screws.
Screw (+PSW4 × 12)
(supplied)
• When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is
larger than the TV.
• To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.
Attachment parts for
Wall-Mount Bracket
(supplied)
Screw (+PSW6 × 16)
(not supplied)
Mounting Hook
(not optional accessory)
Thick and soft cloth
(Continued)
39
GB