Purpose - Volpi KV100 Mode D'emploi

•
Avoid damaged charger will reduce injury.
•
Don't use chargers on tinder surface (e.g. paper or dry goods).
•
The battery is not fully charged when you buy it, you must charge 4-5hours before first use the tool.
Connect the battery to charger before power on.
•
Normal charging time is 4-5hours, don't charge the battery for too long time, it will damage the
battery. Make sure charging at indicate just 1 LED light, this will ensure at battery life.
4.5. Caution (residual risk)
Keep use the tool carefully avoid risk as below:
•
Cutting or injuries due to sharp edges
•
Long times operate or irrationally use the tool will damage your body.
Warning！
The equipment will bring electromagnetism; it can interfere with some medical device in body. It is
suggested to ask for doctor before the usage of the tool by at the same time with medical devices.
Warning!
Don't touch blade when the battery is connected to the tool.
Keep a minimum distance of 15cm between the blades and any part of your body.
Keep other people at a minimum distance of 1.5m
Warning!
Risk of falling material. Never cut branches or other material directly above your head and body to
avoid injuries due to falling material.
Sound and vibration measurements:
Sound pressure level: < 70 dB(A)
Total vibration value: < 2.5 m/s

5. Purpose

The device design only uses for cutting hedge, brush, and branch.
Other not suitable work may be damage tool and yourself.
The equipment design for adult use, don't use in rain or damp brush. Vendor is not responsible for any
damage due to not following the instructions in this manual.
Check blade sharpening before to use the tool. Blade should be sharp before to use. Damages
due to use of a blunt blade are not covered by warranty.
26
2