Purpose - Volpi KV360 Mode D'emploi

•
Avoid damaged charger will reduce injury.
•
Do not use chargers on tinder surface (e.g. paper or dry goods).
•
The battery is not fully charged when you buy it, you must charge 3 / 4 hours before first use the
tool. Connect the battery to charger before power on.
•
Normal charging time is 3 / 4 hours, don't charge the battery for too long time, it will damage the
battery.
•
The charger has three outputs, you can charge up to 3 batteries simultaneously. The charging time
is proportional to the number of batteries connected and the state of their charge. Monitor the
charging time by the LED indicator (red light in charge, green light end of charge).
4.5. Caution (Residual risk)
Keep use the tool carefully avoid risk as below:
•
Cutting or injuries due to sharp edges
•
Long times operate or irrationally use the tool will damage your body.
Warning!
The equipment will bring electromagnetism; it can interfere with some medical device in body. It is
suggested to ask for doctor advise before the usage of the tool at the same time with medical devices.
Warning!
Do not touch the blade when the battery is mounted on the tool. Keep a minimum distance of 15cm
between the blades and any part of your body. Keep other people at a minimum distance of 1.5m
Warning!
In particular situations of very hard use, the blade and the handle could reach high temperatures. It is
recommended to handle the pruner with care, using protective gloves.
Sound and vibration measurements:
Sound pressure level: < 70 dB(A)
Total vibration value: < 2.5 m/s

5. Purpose

The device is designed only for cutting hedge, brush, and branch.
Other not suitable work may damage tool and yourself.
The equipment is designed for adult use, Do not use in rain or damp brush. Vendor is not responsible
for any damage due to not following the instructions in this manual.
30
2