Cutting; Maintenance & Cleaning - Volpi KV100 Mode D'emploi

Cutting

14
Wear suitable work clothes such as
boots with non-slip soles, sturdy long
trousers, gloves and goggles.
Wear protection gloves
Risk of cutting and severe injuries
Risk of falling material. Never cut branches or other material directly above your head and
body to avoid injuries due to falling material.
•
When ready to cut, place the blade on the branch to be cut and press the trigger;
•
When operating the tool, keep the other hand and any other part of your body at a minimum
distance of 15cm from the blade;
•
Keep all other people at a minimum distance of 1.5m
•
Blade will be hurt or jammed if cutting bigger branch
•
Don't move the tool during the pruning shear cutting, it can cause danger.
•
Use sleeve to fix the wire of device avoid wire be draw by branch, that's will cause risk in working.
•
Don't use the device in rain or humidity environment.
•
During storage of the device after use, take off wire from battery and pruning, shut up power
switch before storage.
Caution: please check battery capacity or blade sharpening when cutting is difficult or not
smooth.
15 Maintenance & Cleaning
Tools to be repaired must be sent to Customer Assistance Service. Use original part keeps the
tool good condition and safe.
Switch off the battery power and disconnect the tool before to check, maintain and repair
Wear eye protection
Wear head protection
forcedly.
31