Personal Safety; Special Safety Instruction - Volpi KV100 Mode D'emploi

• Use only the charger specified by the manufacturer. Use of other charger can damage the battery
and cause risk of fire.
• The tool is only designed for original battery. Using other battery to match the tool can cause
damage and risk of injuries.
• Battery should be stored away from metal parts, like clip, coin, key, nail, screw or other small metal
parts. Short circuit the battery will cause fire.
• Inappropriate usage will cause leakage of liquid. If your body is splashed by the liquid, please flush
by clean water. Must see a doctor if liquid touches eyes. Liquid of battery will canker or burn.
3.5. Personal safety：
•
Keep alert, watch what you are doing and use common sense while shifting the power tool. Do not
operate the power tool when you are tired, or under the influence of drugs, alcohol or medication.
A moment of inattention when operating the power tool may cause serious personal injury.
•
Use personal protective equipment. Always wear goggles. Safety equipment, such as dust mask,
anti-skid safety shoes, hard hat, hearing protection and other devices used for appropriate
conditions will reduce personal injury.
•
Avoid accidental start. Make sure that the switch is in the OFF position when connecting the power
supply and/or the battery pack, taking up or moving the tool. Carrying power tool with your finger
on the switch or plugging in power tool that have the switch ON, may cause danger.
•
Remove all adjustment keys or wrenches before the power tool is switched ON. A wrench or key
left attached to a rotating part of the power tool may cause personal injury.
•
Do not overreach. Keep proper footing and balance at all time. This enables better control of the
power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or wear jewelry. Keep clothes, gloves and hair away
from moving parts, because of loose clothing, jewellery or long hair may be caught in moving parts.

4. Special safety instruction

4.1. Pruning shear special safety instruction
•
Keep anybody away at least 1.5m from the blade, don't move cutting parts at blade working.
Keep any part of your body away from the blade at least 15cm.
Carefully operate the equipment can avoid injury.
•
Move the tool at blade not moving. Protection guard is must at storage the tool. Protect blade to
reduce damage.
4.2. Other safety instruction
Wear suitable work clothes such as boots with non-slip soles, sturdy long trousers, gloves and
goggles.
Wear protection gloves
24