Cutout Dimensions - NewAge Products 66992 Guide D'installation Et D'utilisation

Installing Grill on custom built cabinet
Layout for Non-combustible enclosure
Configuration Example 1: With closed cutout bottom
10in
MINIMUM 20 SQ IN (130 SQ
CM) OF VENTILATION
REQUIRED.
MINIMUM 10 SQ IN (65 SQ CM)
OF VENTILATION REQUIRED
WARNING
• The upper vent opening must be at least 20
square inches for a 20 lb propane cylinder.
• The lower vent opening must be at least 10
square inches for a 20 lb propane cylinder.
WARNING
A propane tank can not be stored
below the gas grill. Only 1 max 20 lbs
(12.125in x 17.75in) tank in service
should be used with the Grill.
Propane tank must be secured to the built-in
cabinet inside the cylinder enclosure.
10in
1in
Back View
MINIMUM 20 SQ IN (130 SQ
CM) OF VENTILATION
REQUIRED ON EACH END OF
CABINET.
MAXIMUM
MINIMUM 10 SQ IN (65 SQ CM)
OF VENTILATION REQUIRED ON
EACH END OF CABINET.
ELECTRICAL OPENING
GAS INLET OPENING
5"
127mm
NOTE: The cabinet should not be designed
in a way that a spare cylinder can be stored
inside the enclosure.
The opening of propane enclosure is limited to the dimensions below:
Width (W1) must be less than 23.5".
Height (H1) must be less than 18.5".
SKU
66980
33" Grill
66990
66981
36" Grill
66991
66982
40" Grill
66992
66983
SB
66993
NOTE: These illustrations are for reference purpose
only. Actual built-in cabinets and installation may
differ.
Min 4"
3"
H
3"
D
7.5"
2.4"
2.8"
2.4"
5"
127mm
MAXIMUM
1"
25.4mm
MAXIMUM

Cutout Dimensions

W
31.5" 22.3"
34.5 22.3"
38.5" 22.3"
15.3" 22.4"
1.19"
0.78"
36"
915mm
RECOMMENDED
W
D H
11.2"
11.2"
11.2"
11.3"
17